What voltage and current range does the OIP Composite Sleeve Oil-SF6 Wall Bushing cover?

Catalogue voltage range: AC 800kV / DC ±800kV (DC 1000kV Class); current range: 3150A. Confirm the rating of the specific model and drawing.

Which standards are referenced?

Catalogue standard reference: IEC 62199 / IEC 60137 / GB/T 22674 / GB/T 4109. Request type-test evidence for the specific model.

Which applications is it used in?

HVDC Converter Stations & Valve Halls.

Home Products OIP & RIP BushingsOIP Composite Sleeve Oil-SF6 Wall Bushing

Composite Oil-SF6 WallAC 800kV / DC ±800kV (DC 1000kV Class)

Review model drawings and test evidence

OIP & RIP Bushings

OIP Composite Sleeve Oil-SF6 Wall Bushing

Composite silicone sheathed oil-SF6 wall bushing for UHVDC converter station valve halls.

Rated VoltageAC 800kV / DC ±800kV (DC 1000kV Class)

Rated Current3150A

Insulation TypeOil-Impregnated Paper (OIP) / Composite Sleeve

Catalog standardIEC 62199 / IEC 60137 / GB/T 22674 / GB/T 4109

PD requirementConfirm by model

Test evidenceRequest with RFQ

Buyer requirement checklist

Match the electrical duty and transformer or wall interface before requesting a design.

Rated voltage, current, AC/DC duty and insulation medium
Flange, terminal, oil-side length and CT pocket drawing
Creepage, altitude, pollution and mounting angle
Existing nameplate and drawings for replacement review

IEC 60137 applies to complete AC bushings; confirm edition and model-specific test evidence. Replacement fit requires drawing approval.

OIP bushing catalog (PDF)RIP bushing catalog (PDF)

Prepare Engineering Inquiry

Product Technical Overview

Composite-housed oil-to-SF6 wall bushing. Confirm oil and gas interfaces, pressure, sealing, AC/DC duty and test scope against the selected model.

Compatible Substation Apparatus

UHVDC Converter Station Valve HallsBack-to-Back HVDC StationsOffshore HVDC Converter Platforms

Showing 9 of 9 models

Catalog values are representative. Confirm the selected model, drawings and test evidence during inquiry.IEC 60137 applies to complete AC bushings; confirm edition and model-specific test evidence. Replacement fit requires drawing approval.

Parameter	Value
Rated DC Voltage	±800 kV DC (1000kV Class)
Rated Current	3150 A (Indoor <= 50℃ / Outdoor <= 40℃)
Lightning Impulse Withstand	2400 kV
Switching Impulse Withstand	2000 kV (Dry & Wet)
1h Power Frequency + PD 1h+	1025 kV, PD <= 10 pC
2h Power Frequency + PD 2h+	1350 kV, PD <= 10 pC
Polarity Reversal Withstand	±1005 kV, PD <= 10 pC
Minimum Creepage	>= 32000 mm
Bending Load	5000 N

Custom Engineering & Flange Dimensions Note:

Dimensions, interfaces and replacement compatibility require approved drawings and technical review.

Engineering Inquiry Draft

Request Quotation for OIP Composite Sleeve Oil-SF6 Wall Bushing

Enter your requirements and send them to our sales desk. If online sending is unavailable, you get an email draft instead.

OIP Composite Sleeve Oil-SF6 Wall Bushing: FAQ

What voltage and current range does the OIP Composite Sleeve Oil-SF6 Wall Bushing cover?: Catalogue voltage range: AC 800kV / DC ±800kV (DC 1000kV Class); current range: 3150A. Confirm the rating of the specific model and drawing.
What insulation or construction is used?: Oil-Impregnated Paper (OIP) / Composite Sleeve.
Which standards are referenced?: Catalogue standard reference: IEC 62199 / IEC 60137 / GB/T 22674 / GB/T 4109. Request type-test evidence for the specific model.
Which applications is it used in?: HVDC Converter Stations & Valve Halls.